Hogwarts and the Atypical Wizard

Chapter 253: Solving the Fairy Fire Problem and Finding a Car in the Forbidden Forest

Sainz tried to multitask, but he could only assemble five parts at a time.

These five parts are all controlled by his magic power and meet the requirements of demonization. One production cycle can be used to produce five fairy fire bases at the same time.

But this production speed was far from meeting his requirements.

And operating five parts simultaneously is far from his limit, but if there are more, the manufacturing accuracy will decrease and the parts will not fit properly.

Sainz used magic to control the parts to float up. If no fine-tuning operation was performed, the number could be all, just like grabbing a handful of sand. If you don't care how many grains of sand there are, the number will be almost uncountable.

But if you want every stone in the sand to be placed in a specific position according to your wishes, you have to place them one by one. Of course, some experts can make several stones reach the specified position at the same time.

Sainz felt that if he trained hard, he should be able to control twenty or even more parts to perform the required movements.

This is still not enough, it’s still a matter of time!

Multi-thread operation still needs to be practiced. After all, it is a very useful ability. The time problem also needs to be solved, because sometimes, spending extra time is completely unnecessary.

For example, when making duplicate items, it is a shame to waste time.

What should I do if I want to save time but cannot perform multi-line precision operations?

There is a solution!

Magic power needs to be involved in the process of fitting parts together, otherwise they cannot be enchanted and what is obtained will not be an alchemical item.

"Magic participation" does not mean "magic fine control", and there is room for discussion on this point.

To use an analogy, if he were to remove the beans from the table and put them into a bottle, he could choose to carefully pinch them one by one, or he could choose to sweep them out with his hands.

The requirement of removing the beans is met when sweeping them out, but there will obviously be problems when putting them into the bottle.

In this situation, many people can only choose to squeeze them into the bottle one by one.

So is it possible to put the beans accurately into the bottle while sweeping them out quickly with your hands?

Of course!

In fact, all it takes is a little help!

He can dig a groove on the table and force all the beans to follow the groove when sweeping with his hand. The final landing point of the groove is at the mouth of the bottle. He may not know the specific trajectory of each bean, but the final result is that the beans are moved away and put into the bottle.

What Sainz needs to do now is to design a one-way passage for the parts!

After he placed multiple parts into multiple one-way passages, it was forced to maintain the posture that Sainz wanted.

Then Sainz no longer needs to exercise fine control, his magic only needs to play the role of contact and pushing.

The parts will have to turn when they need to turn, turn over when they need to turn over, fit together when they need to fit together, and at the same time meet the requirements of "magic participation".

It took him three months, until the end of the Easter holiday, to finally acquire the ability to make multiple torch bases at the same time.

When he finally used the one hundred pre-designed tracks to simultaneously produce one hundred handles, he couldn't help but laugh happily.

"Hehe, Sai has overcome difficulties and won again!"

Sometimes, some difficult problems are just problems caused by a lack of thinking. Once you change your thinking, it will become really simple.

At the beginning, Sainz didn't think too much about it after he rubbed out a torch with his hands. After making a few more, he found the problem. If the production efficiency could not be improved, the modification of the magic ship would become a distant dream.

Then he began to try to abandon the torches and directly carry out the overall production, but found that he could not transplant the runes or detach the torches for the time being.

Since there is no way to get rid of torches, is it possible to simplify the production of torches?

It was also discovered that the most that could be omitted was the inner core at the center of the handle which served as the attachment. The other component parts could not be reduced at all due to the rune sequence.

Moreover, although the runes on these parts can be engraved using mechanical means, if there is no magic involved and a pathway is formed when the parts are assembled and fitted together, the two parts combined together can only produce a beautiful pattern at most.

Each rune combination must be connected by magic to form a pathway before the next operation can be carried out and the next rune can be matched.

This step directly eliminated his idea of ​​being lazy and saving trouble, and also eliminated the possibility of producing alchemical items after pure Muggle operation.

This is a bit similar to the making of potions. A Muggle, even if he has mastered all the steps of making potions and the materials used are perfect, he will never be able to make a potion.

As the saying goes in the judicial world, wrong procedures will not lead to right results!

Purely Muggle operation is a wrong procedure in the making of potions and alchemical items!

Fortunately, Sai was not too stupid and he finally found a "lazy" way to use the "legal" procedure, and finally managed to produce multiple torches at one time.

Sai, who had finally completed a big project, was in a good mood and strolled to the Black Lake.

Speed, who hadn't seen him for many days, flew over excitedly from a distance and landed on his shoulder.

Speed ​​is an adult now and not as naughty as he used to be. There was a time when he was very keen on pecking Sainz's scalp and watching him get angry.

Play with the big bird for a while, then let him play by himself.

Sainz decided to take a trip to the Forbidden Forest.

After returning from Christmas, he set up many more peepholes in the Forbidden Forest.

After working for a long time, Jerry finally roughly determined the range of the car abandoned by Ron and Harry in the Forbidden Forest.

Some time ago, I was busy studying the possibility of multiple production of Gublai Fairy Fire and had no time to take care of it. Now that I have time, it's time to invite it back to cooperate with the research.

He looked around and saw no one was paying attention, so he slipped into the forbidden forest.

After entering the forbidden forest, Sainz went into stealth mode and flew out of sight.

Following Jerry's instructions, we entered the approximate movement range of the car and began searching.

After searching for a while, Sainz thought that this might be the edge of the car activity area and he should continue searching inside.

Sure enough, after walking a little further in, there were more and more old wheel marks on the ground.

Continuing to go inside, Sainz felt the malice coming from the front.

"Hey, Sai didn't bother you for Hagrid's sake, but you guys came to me on your own initiative!"

Soon, all around were filled with malice.

There was a rattling sound coming from the front.

Suddenly, Sainz shook his magic wand, turned around and chopped a spider the size of a small car into pieces.

“A sneak attack?

I've been on guard against you!"